Optoma ZU606TSTe User Manual
  1. Manuals
  2. Brands
  3. Optoma Manuals
  4. Projector
  5. ZU606TSTe
  6. User manual

Optoma ZU606TSTe User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DLP
Projector
®
User manual

Advertisement

Table of Contents
loading

Related Manuals for Optoma ZU606TSTe

Summary of Contents for Optoma ZU606TSTe

  • Page 1 Projector ® User manual...

  • Page 2: Table Of Contents

    TablE of ConTEnTs safETY ....................4 Important Safety Instruction....................... 4 Laser Radiation Safety Information ................... 5 Copyright ........................... 6 Disclaimer ..........................6 Trademark Recognition ......................6 FCC ............................6 Declaration of Conformity for EU countries ................7 WEEE ............................7 InTRoDUCTIon ..................
  • Page 3 Compatible resolutions ......................54 Image size and projection distance ..................57 Projector dimensions and ceiling mount installation ..............59 IR remote codes ........................60 Troubleshooting ........................62 Warning indicators ........................64 Specifications ........................... 65 Optoma global offices ....................... 66 English...

  • Page 4: Safety

    Please do not open or disassemble the projector as this may cause electric shock. ‡ Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. English...

  • Page 5: Laser Radiation Safety Information

    ‡ See projector enclosure for safety related markings. ‡ The unit should only be repaired by authorized service personnel. ‡ Only use attachments/accessories specified by the manufacturer. ‡ Do not look into straight into the projector lens during operation. The bright light may harm your eyes. ‡...

  • Page 6: Copyright

    Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2019 Disclaimer The information in this document is subject to change without notice.

  • Page 7: Declaration Of Conformity For Eu Countries

    operation Conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.

  • Page 8: Introduction

    Projector Remote control Power lead Documentation note: ‡ The remote control is shipped with the battery. ‡ * For European warranty Information, please visit www.optoma.com. optional accessories lens cap CD user manual Carry bag VGa cable note: ‡ Optional accessories vary depending on model, specification and region.

  • Page 9: Product Overview

    InTRoDUCTIon Product overview note: ‡ Do not block projector intake and exhaust vents. ‡ When operating the projector in an enclosed space, allow at least 30 cm clearance around the intake and exhaust vents. Item Item IR Receivers Tilt-Adjustment Feet Keypad Kensington™...

  • Page 10: Connections

    InTRoDUCTIon Connections Item Item HDMI 2 Connector 10. Kensington Lock Port HDMI 1 / MHL Connector 11. AUDIO-OUT Connector USB POWER OUT (5V 1.5A) 12. AUDIO-IN 2 Connector Connector VGA-IN 1 Connector 13. VGA-OUT Connector VGA-IN 2 Connector 14. RS232 S-VIDEO Connector 15.

  • Page 11: Keypad

    InTRoDUCTIon Keypad Item Item Lamp LED Temp LED Power and Power LED Re-Sync Menu Four Directional Select Keys Keystone Correction Source Enter 10. Information English...

  • Page 12: Remote Control

    InTRoDUCTIon Remote control Geometric Correction PIP/PBP Mode AV Mute ENTER Info. Source Re-Sync Volume D Zoom Menu Format Freeze Remote S-Video HDMI1 HDMI2 HDBaseT Video HDMI3 YPbPr DisplayPort Item Item Power on 18. YPbPr (not supported) Geometric Correction 19. Numeric keypad (0-9) Function button (F1) (Assignable) 20.

  • Page 13: Setup And Installation

    Do not operate the projector in any orientation other than table top or ceiling mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector light source or the projector itself. For none standard installation advise please contact Optoma. English...
  • Page 14 sETUP anD InsTallaTIon Projector installation notice note: Projector power will dim to 60% and fan full load. 195°~345° ‡ Portrait mode Air outlet side 10° 10° 10° 10° 10° 10° ‡ Allow at least 30 cm clearance around the exhaust vent. Minimum 100mm Minimum 300mm Minimum 300mm...
  • Page 15 sETUP anD InsTallaTIon Minimum 100mm Minimum 100mm (3.94 inches) (3.94 inches) ‡ Ensure that the intake vents do not recycle hot air from the exhaust vent. ‡ When operating the projector in an enclosed space, ensure that the surrounding air temperature within the enclosure does not exceed operation temperature while the projector is running, and the air intake and exhaust vents are unobstructed.

  • Page 16: Connecting Sources To The Projector

    sETUP anD InsTallaTIon Connecting sources to the projector Item Item HDMI Cable 10. Audio In Cable MHL Cable 11. 12V DC Jack HDMI Dongle 12. Microphone Cable USB Power Cable 13. Audio Out Cable VGA In Cable 14. VGA Out Cable RCA Component Cable 15.

  • Page 17: Adjusting The Projector Image

    sETUP anD InsTallaTIon adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. Locate the adjustable foot you wish to adjust on the underside of the projector. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring lens shift and focus...

  • Page 18: Remote Setup

    sETUP anD InsTallaTIon Remote setup Installing / replacing the batteries Two AAA size batteries are supplied for the remote control. Remove the battery cover on the back of the remote control. Insert AAA batteries in the battery compartment as illustrated. Replace back cover on remote control.
  • Page 19 sETUP anD InsTallaTIon Effective range Infra-Red (IR) remote control sensor is located on the top and front sides of the projector. Ensure to hold the remote control at an angle within 30 degrees perpendicular to the projector’s IR remote control sensor to function correctly.

  • Page 20: Using The Projector

    UsInG THE PRoJECToR Powering on / off the projector Geometric Correction PIP/PBP Mode AV Mute ENTER Info. Source Re-Sync Volume D Zoom Menu Format Freeze Remote Lens cap S-Video HDMI1 HDMI2 HDBaseT Video HDMI3 Powering on YPbPr DisplayPort Remove the lens cap. Securely connect the power lead and signal/source cable.

  • Page 21: Selecting An Input Source

    UsInG THE PRoJECToR Geometric Correction PIP/PBP selecting an input source Mode AV Mute Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, press the button on the projector keypad or the source button on the remote control to select the desired input.

  • Page 22: Menu Navigation And Features

    UsInG THE PRoJECToR menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. To open the OSD menu, press the button on the projector keypad or the menu button on the remote control.

  • Page 23: Osd Menu Tree

    UsInG THE PRoJECToR osD menu tree main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Presentation Bright Cinema Display Mode Game sRGB DICOM SIM. User Off [Default] Blackboard Light Yellow Wall Color Light Green Light Blue Pink Gray Auto [Default]...
  • Page 24 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Warm Standard Color Temperature Cool Cold Red [Default] Green Blue Color Cyan Yellow Magenta Color Matching White(*) Hue / R(*) -50 ~ 50 [Default: 0] Saturation / G(*) -50 ~ 50 [Default: 0] Gain / B(*)
  • Page 25 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu -5 ~ 5 (depends on signal) H. Position [Default: 0] Signal -5 ~ 5 (depends on signal) V. Position [Default: 0] DynamicBlack Image Settings Power Brightness Mode (Power = 100%/ 95%/ 90%/ 85%/...
  • Page 26 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Audio 1 Audio 2 HDMI1/MHL Default [Default] Audio 1 HDMI2 Audio 2 Default [Default] Audio 1 HDBaseT [Only for Audio 2 HDBaseT model] Default [Default] Audio 1 [Only for...
  • Page 27 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Security Month Security Security Timer Hour Change [Default: 1234] Password [Default] HDMI Link [Default] Inclusive of TV HDMI Link Mutual [Default] Settings Power On Link PJ →...
  • Page 28 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Test Pattern Brightness Contrast Sleep Timer Remote Settings Color Matching [depends on Color Temp remote] Gamma Projection Projector ID 00 ~ 99 12V Trigger Ethernet Off [Default] HDBaseT...
  • Page 29 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Closed Captioning Off [Default] Top left Top right Menu Location Center [Default] Bottom left Menu Settings Bottom right Menu Timer 5sec 10sec [Default] Off [Default] Auto Source HDMI1/MHL...
  • Page 30 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Off [Default] Keypad Lock Off [Default] Information Hide Default [Default] Neutral Logo User Options None [Default for Video/Pro-AV model] note: “None” means black color background.
  • Page 31 UsInG THE PRoJECToR main sub menu sub menu 2 sub menu 3 sub menu 4 Values menu Regulatory Serial Number Source Resolution 00x00 Refresh Rate 0.00Hz Display Mode Remote Code 00 ~ 99 Remote 00 ~ 99 Code(Active) Power Mode Info (Standby) Light Source...

  • Page 32: Display Image Settings Menu

    UsInG THE PRoJECToR Display menu Display image settings menu Display mode There are many factory presets optimized for various types of images. ‡ Presentation: This mode is suitable for showing in front of public in connection to the PC. ‡ bright: Maximum brightness from PC input.
  • Page 33 UsInG THE PRoJECToR Color Adjust a video image from black and white to fully saturated color. Tint Adjust the color balance of red and green. Gamma Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output.
  • Page 34 UsInG THE PRoJECToR Color space (HDmI input only): select an appropriate color matrix type from the following: Auto, ‡ RGB(0-255), RGB(16-235), and YUV. ‡ White level: Allow user to adjust White Level when inputting Video signals. note: White level can only be adjusted for Video/S-Video input sources. ‡...

  • Page 35: Display 3D Menu

    UsInG THE PRoJECToR Display 3D menu note: ‡ This projector is a 3D ready projector with DLP-Link 3D solution. ‡ Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video. ‡ This projector supports frame sequential (page-flip) 3D via HDMI1/HDMI2/VGA ports. ‡...

  • Page 36: Display Aspect Ratio Menu

    UsInG THE PRoJECToR Display aspect ratio menu aspect Ratio Select the aspect ratio of the displayed image between the following options: ‡ 4:3: This format is for 4:3 input sources. ‡ 16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. ‡...
  • Page 37 UsInG THE PRoJECToR 1080p auto mapping rule: Input resolution auto/scale auto H-resolution V-resolution 1920 1080 1440 1080 1440 1080 1024 1440 1080 1280 1024 1440 1080 1400 1050 1440 1080 1600 1200 1440 1080 1280 1920 1080 Wide Laptop 1280 1800 1080 1280...
  • Page 38 UsInG THE PRoJECToR WUXGa auto mapping rule (screen type 16:10): Input resolution auto/scale auto H-resolution V-resolution 1920 1200 1600 1200 1600 1200 1024 1600 1200 1280 1024 1600 1200 1400 1050 1600 1200 1600 1200 1600 1200 1280 1920 1080 Wide Laptop 1280 1920...

  • Page 39: Display Edge Mask Menu

    UsInG THE PRoJECToR WUXGa auto mapping rule (screen type 16:9): Input resolution auto/scale auto H-resolution V-resolution 1920 1080 1440 1080 1440 1080 1024 1440 1080 1280 1024 1440 1080 1400 1050 1440 1080 1600 1200 1440 1080 1280 1920 1080 Wide Laptop 1280 1800...

  • Page 40: Audio Mute Menu

    UsInG THE PRoJECToR auto Keystone Correct keystone digitally to fit the projected image on the area on which you are projecting. note: ‡ The image size will reduce slightly when adjusting the horizontal and vertical keystone. ‡ When the Auto Keystone is used, the Four Corner Adjustment function will be disabled. Reset Return the factory default settings for geometric correction settings.

  • Page 41: Setup Projection Menu

    UsInG THE PRoJECToR Setup menu setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. setup screen type menu screen Type (for WUXGa model only) Choose the screen type from 16:9 and 16:10. setup power settings menu Direct Power on Choose “On”...

  • Page 42: Setup Security Menu

    UsInG THE PRoJECToR setup security menu security Enable this function to prompt for a password before using the projector. ‡ on: Choose “On” to use security verification when the turning on the projector. ‡ off: Choose “Off” to be able to switch on the projector without password verification. security Timer Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used.

  • Page 43: Setup Remote Settings Menu

    UsInG THE PRoJECToR setup remote settings menu IR function Set the IR function setting. ‡ on: Choose “On”, the projector can be operated by the remote control from the top and front IR receivers. ‡ off: Choose “Off”, the projector can’t be operated by the remote control. By selecting “Off”, you will be able to use the Keypad keys.

  • Page 44: Setup Options Menu

    UsInG THE PRoJECToR setup options menu language Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish, Norwegian/Danish, Finnish, Greek, traditional Chinese, simplified Chinese, Japanese, Korean, Russian, Hungarian, Czechoslovak, Arabic, Thai, Turkish, Farsi, Vietnamese, Indonesian, Romanian, and Slovenian. Closed Captioning Closed Captioning is a text version of the program sound or other information displayed on the screen.

  • Page 45: Setup Reset Osd Menu

    UsInG THE PRoJECToR logo Use this function to set the desired startup screen. If changes are made, they will take effect the next time the projector is powered on. ‡ Default: The default startup screen. ‡ neutral: Logo is not displayed on startup screen. ‡...

  • Page 46: Network Control Menu

    UsInG THE PRoJECToR How to use web browser to control your projector Turn “On” the DHCP option on projector to allow a DHCP server to automatically assign an IP address. Open the web browser in your PC and type in the projector’s IP address (“Network > LAN > IP Address”).

  • Page 47: Setup Network Control Settings Menu

    UsInG THE PRoJECToR Telnet Use this function to select the network function (port: 23). HTTP Use this function to select the network function (port: 80). setup network control settings menu lan_RJ45 function For simplicity and ease of operation, the projector provides diverse networking and remote management features. The LAN / RJ45 function of the projector through a network, such as remotely manage: Power On / Off, brightness, and contrast settings.
  • Page 48 UsInG THE PRoJECToR lan RJ45 Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). On the PC (Laptop), select start > Control Panel > network Connections. Right-click on the Local area Connection, and select Property. In the Properties window, select the General tab, and select Internet Protocol (TCP / IP).
  • Page 49 UsInG THE PRoJECToR Click “Properties”. Type in the IP address and Subnet mask, then press “OK”. Press the “Menu” button on the projector. Open on projector network > lan. Enter the following connection parameters: ± DHCP: Off ± IP Address: 192.168.0.100 ±...
  • Page 50 UsInG THE PRoJECToR Information page Main page Tool page Contact IT helpdesk English...
  • Page 51 UsInG THE PRoJECToR Rs232 by Telnet function There is alternative RS232 command control way, in projector so called “RS232 by TELNET” for LAN / RJ45 interface. Quick start-Guide for “Rs232 by Telnet” ‡ Check and get the IP address on OSD of the projector. ‡...

  • Page 52: Info Menu

    UsInG THE PRoJECToR Info menu Info menu View the projector information as listed below: ‡ Regulatory ‡ Serial Number ‡ Source ‡ Resolution ‡ Refresh Rate ‡ Display Mode ‡ Remote Code ‡ Remote Code(Active) ‡ Power Mode (Standby) ‡ Light Source Hours ‡...

  • Page 53: Maintenance

    maInTEnanCE Installing and cleaning the dust filter Installing the dust filter note: Dust filters are only required/supplied in the selected regions with excessive dust. Cleaning the dust filter We recommend you to clean the dust filter every three months. Clean it more often if the projector is used in a dusty environment.

  • Page 54: Additional Information

    aDDITIonal InfoRmaTIon Compatible resolutions Digital (HDMI 1.4) Native resolution: 1920 x 1080 @ 60Hz (ZH606TST); 1920 x 1200 @ 60Hz (ZU606TST) b0 / Established b0 / standard b0 / Detail Timing: b1 / Video mode b1 / Detail Timing: Timing Timing 720 x 400 @ 70Hz 1080P/WUXGA:...
  • Page 55 aDDITIonal InfoRmaTIon b0 / Established b0 / standard b0 / Detail Timing: b1 / Video mode b1 / Detail Timing: Timing Timing 3840 x 2160 @ 50Hz 16:9 3840 x 2160 @ 60Hz 16:9 4096 x 2160 @ 50Hz 256:135 4096 x 2160 @ 60Hz 256:135 4096 x 2160 @ 25Hz...
  • Page 56 If 3D input is 1080p@24Hz, the DMD should replay with integral multiple with 3D mode. ‡ Support NVIDIA 3DTV Play if there is no patent fee from Optoma. ‡ 1080i@25Hz and 720p@50Hz will run in 100Hz, other 3D timing will run in 120Hz, and 1080P@24Hz will run in 144Hz.

  • Page 57: Image Size And Projection Distance

    aDDITIonal InfoRmaTIon Image size and projection distance 1080p Desired Image size Projection Distance (C) Diagonal Width Height Wide inch inch inch feet 0.91 0.80 31.38 0.45 17.65 2.07 1.02 0.89 34.86 0.50 19.61 2.30 1.27 1.11 43.58 0.62 24.51 2.87 1.52 1.33 52.29...
  • Page 58 aDDITIonal InfoRmaTIon Desired Image size Projection Distance (C) Diagonal Width Height Wide inch inch inch feet 1.52 1.29 50.88 0.81 31.80 3.35 1.78 1.51 59.36 0.94 37.10 3.91 2.03 1.72 67.84 1.08 42.40 4.47 2.29 1.94 76.32 1.21 47.70 5.02 2.54 2.15 84.80...

  • Page 59: Projector Dimensions And Ceiling Mount Installation

    InfoRmaTIon Projector dimensions and ceiling mount installation To prevent damage to your projector, please use the Optoma ceiling mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ‡...

  • Page 60: Ir Remote Codes

    aDDITIonal InfoRmaTIon Warning: ‡ If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting plate. ‡ Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector. ‡...
  • Page 61 aDDITIonal InfoRmaTIon Key code Printing-key bYTE1 bYTE2 bYTE3 bYTE4 Repeat definition customer 0 customer 1 data 0 data 1 Up arrow #BYTE3 Four Down arrow #BYTE3 directional select keys Left arrow #BYTE3 ( / / / ) Right arrow #BYTE3 Enter Enter #BYTE3...

  • Page 62: Troubleshooting

    aDDITIonal InfoRmaTIon Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen ‡ Ensure all the cables and power connections are correctly and securely connected as described in the "Installation"...
  • Page 63 aDDITIonal InfoRmaTIon other problems The projector stops responding to all controls ‡ If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work ‡...

  • Page 64: Warning Indicators

    aDDITIonal InfoRmaTIon Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: ‡ “Lamp” LED indicator is lit red and if “Power” indicator flashes red. ‡ “Temp” LED indicator is lit red and if “Power” indicator flashes red. This indicates the projector has overheated.

  • Page 65: Specifications

    aDDITIonal InfoRmaTIon Specifications optical Description Maximum resolution WUXGA ‡ 1080p Native resolution ‡ WUXGA Lens Manual focus ‡ 1080p: 28.59”~303” Image size (diagonal) ‡ WUXGA: 29.38”~305.6” ‡ 1080p: 0.5m~5.3m Projection distance ‡ WUXGA: 0.5m~5.2m Electrical Description ‡ HDMI 1.4a ‡ HDMI 2.0b / MHL 2.2 ‡...

  • Page 66: Optoma Global Offices

    InfoRmaTIon Optoma global offices For service or support, please contact your local office. Japan 47697 Westinghouse Drive, 888-289-6786 東京都足立区綾瀬3-25-18 Fremont, CA 94539, USA 510-897-8601 info@os-worldwide.com 株式会社オーエス www.optomausa.com services@optoma.com 0120-380-495 www.os-worldwide.com コンタク トセンター: Canada Taiwan 47697 Westinghouse Drive, 888-289-6786 12F., No.213, Sec. 3, Beixin Rd.,...
  • Page 67 *36.7FJ01G001-A* P/N:36.7FJ01G001-A www.optoma.com...

This manual is also suitable for:

Zh606eZu606teZu606t-wZh606-wZu606tst

Table of Contents