Table of Contents
Advertisement
USING THE PROJECTOR
User: Memorize user's settings. Any adjustment in this mode will be automatically saved.
‡
‡
Save to User: Save the current display mode settings in user profile.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers,
use this function to correct it.
Frequency
Change the display data frequency to match the frequency of your computer's graphic card. Use this function only
if the image appears flickering vertical lines.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
3D
Configure the 3D display settings. Refer to "3D menu" on page 32.
Color Matching
Configure the color management settings. Refer to "Color Matching menu" on page 33.
Advanced
Configure the advanced image settings. Refer to "Advanced menu" on page 34.
31
English
Advertisement
Table of Contents
