USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
1.
To open the OSD menu, press "Menu" on the remote control or the projector keypad.
2.
When OSD is displayed, use pqtu to navigate within the menu and adjust a setting up or down.
3.
Press "Enter" to enter the submenu or confirm the selection/setting.
4.
Press "Exit" to return to the previous menu or exit menus if at top level.
22
English
Main Menu
DISPLAY
Display Mode
Brightness
Contrast
OUTPUT
Sharpness
Color
Tint
SETUP
Phase
Frequency
Horz Position
OPTION
Vert Position
Sub Menu
DISPLAY
Presentation
50
50
8
Settings
50
50
50
50
50
50