Table of Contents
Advertisement
4.
Press the number keys to enter the horizontal value
5.
Press the number keys to enter the vertical value
• For details about the available paper size, see page 28 "Paper Size Specifications".
Specifying a Paper Type
You can improve printer performance by selecting the optimum paper type for the tray.
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1.
Select [Paper Input]
2.
Select [Paper Type: (tray name)]
3.
Select the type of the paper set in the specified tray
The setting is complete when specifying the following types of paper:
Thin Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Thick Paper 4, Special
Paper 1, Special Paper 2, Special Paper 3, Recycled Paper, Preprinted Paper, OHP
(Transparency)
4.
If you have selected [No Display (Plain Paper)], [Letterhead], [Coated Paper (Glossy)],
[Coated Paper(Glossy:Thick)], [Coated Paper (Matted)], [Coated Paper(Matted:Thick)],
[Waterproof Paper], [Label Paper], or [Envelope] for the paper type, press [Escape]
5.
Select [Maintenance]
6.
Select [General Settings]
7.
Select the paper thickness setting for the specified paper type
8.
Select the tray where the specified type of paper is loaded
If you selected [Letterhead Setting], [Label Paper Setting], or [Envelope Setting] in Step 8, you can
specify the paper thickness for each tray separately. For other paper types, the specified paper
thickness is applied to all trays.
9.
Select the paper thickness
• For details about the available paper type, see page 30 "Paper Type Specifications".
Configuring Envelope Settings Using the Control Panel
When printing on envelopes, load envelopes in bypass tray or Tray 1, and then follow the procedure
below to specify envelope type and thickness.
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
[OK]
Paper Settings
47
Advertisement
Table of Contents
Troubleshooting
