Table of Contents
Advertisement
Faxing
>
Before Using Fax Features
2. Select Contacts.
3. Do one of the following.
❏ To register a new contact, select Add Entry, and then select Add Contact.
❏ To edit a contact, select
❏ To delete a contact, select
have to perform following procedures.
4. Make the necessary settings.
Note:
When entering a fax number, enter an external access code at the beginning of the fax number if your phone system is
PBX and you need the access code to get an outside line. If the access code has been set in the Line Type setting, enter a
hash (#) instead of the actual access code. To add a pause (pause for three seconds) during dialing, enter a hyphen (-).
5. Select OK.
Registering or Editing Grouped Contacts
Adding contacts to a group allows you to send a fax to multiple destinations at the same time.
1. Select Fax on the home screen.
2. Select Contacts.
3. Do one of the following.
❏ To register a new grouped contacts, select Add Entry, and then select Add Group.
❏ To edit a grouped contacts, select
❏ To delete a grouped contacts, select
select Yes. You do not have to perform following procedures.
4. Enter or edit the Group Name (Required) and the Index Word, and then select Contact(s) Added to the
Group (Required).
5. Select the contacts that you want to register in the group, and then tap Close.
Note:
❏ You can register up to 99 contacts.
❏ To deselect a contact, tap it again.
6. Select OK.
Registering Contacts on a Computer
Using Web Config, you can create a contact list on your computer and import it to the printer.
1. Access Web Config.
>
Making Contacts Available
on the target contact, and then select Edit.
on the target contact, and then select Delete, and then select Yes. You do not
on the target grouped contacts, and then select Edit.
on the target grouped contacts and then select Delete, and then
77
Advertisement
Table of Contents
