Section 3 - Operation; Controls; Installing Receptacle Module For Use With A Spool Gun (Optional) - Miller BOC Migmatic 250 Owner's Manual

3-1. Controls

1
3

3-2. Installing Receptacle Module For Use With A Spool Gun (Optional)

1
Tools Needed:
SECTION 3 – OPERATION
2
4
5
2
1 Wire Speed Control
The scale around the control is per-
cent, not wire feed speed.
2 Voltage Switch
The scale around the control is
actual voltage.
3 Low Range/Full Range Switch
Use Low Range when wire speed is
between 50 and 350 ipm.
4 Pilot Light
5 Power Switch
Ref. ST-148 579-A / Ref. ST-174 835-A
Remove existing options panel.
1 Module
2 Plug PLG9
3 Plug PLG7
Connect PLG9 to PLG7.
3
Slide module into upper front panel
where options panel was removed.
Secure with screws.
See Options and Accessories
page at end of manual, or contact
your Factory Authorized Service
Agent for details.
ST-801 732
OM-1308 Page 11