Removing Mig Gun To Replace With A Spool Gun - Miller Multimatic 220 Owner's Manual

5-15. Removing MIG Gun To Replace With A Spool Gun

2-12. Removing MIG Gun To Replace With A Spool Gun
1
4
6
allen_set
knife
282718A / Ref. 802982A / Ref. 282722A / Ref. 282721A
Step 1. Turn Off power. heavy-duty workclamp
Step 2. Cut off end of wire.
Step 3. Open pressure assembly.
Step 4. Rewind wire onto spool. Fasten end
of wire to spool.
OM-281426 Page 30
�
Complete Parts List is available at www.MillerWelds.com
A complete Parts List is available at www.MillerWelds.com
tools/
flathead philips head
Warning
steelbrush
light-duty workclamp
�
Hold wire tightly to keep it from
unraveling.
Step 5. Loosen knob, disconnect gun trigger
plug, and remove gun from unit.
2
Warning
wrench
crescent wrench
nutdriver
chippinghammer
wirecutter frontcutter
3
5
Step 6. Insert power pin, connect spool gun
trigger plug, and tighten knob.
OM-281426 Page 19