Installing The Boss S2 Card Carrier - Dell E76S Installation And Service Manual

Figure 116. Installing the BOSS S2 card carrier blank
Next steps
Replace the BOSS S2 card carrier

Installing the BOSS S2 card carrier

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. If installed, remove the front
Steps
1. Press the release clip and pull the BOSS S2 card carrier blank out of the system.
Figure 117. Removing the BOSS S2 card carrier blank
116 Installing and removing system components
Safety instructions.
Before working inside your
bezel.
system.