Table of Contents
Advertisement
Table 46. Status LED indicators and descriptions (continued)
Icon
Description
Memory indicator The indicator turns solid amber if a
PCIe indicator
System health and system ID indicator codes
The system health and system ID indicator is located on the front panel of the system.
Figure 181. System health and system ID indicator
Table 47. System health and system ID indicator codes
System health and system ID
indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the front IO panel of the system.
Condition
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Condition
Indicates that the system is powered on, is healthy, and system ID mode is not active.
Press the system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID
button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists, see the
help
section.
Indicates that the system is experiencing a fault. Check the System Event Log
for specific error messages. For information about the event and error messages
generated by the system firmware and agents that monitor system components, go
to
qrl.dell.com
> Look Up > Error Code, type the error code, and then click Look it
up.
Corrective action
If the problem persists, see the
Getting help
section.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
Getting help
section.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
Getting help
section.
NOTE:
For more information about the
supported PCIe cards, see the Expansion card
installation guidelines section.
System diagnostics and indicator codes
Getting
175
Advertisement
Table of Contents
