Table of Contents
Advertisement
Table 7. Rear view of the system
Item
Ports, panels, or slots
1
Power supply unit (PSU 1) N/A
2
Power supply unit (PSU
2)
3
PCIe expansion card slots
(4)
4
System identification
button
5
VGA port
6
OCP NIC port (optional)
7
USB ports (2)
8
iDRAC dedicated port
9
NIC ports (2)
10
NIC ports (1)
NOTE:
For more information, see the Dell EMC PowerEdge T550 Technical Specifications on the product documentation
page.
20
PowerEdge T550 system overview
Icon
Description
This is the primary PSU of the system. For more information about
the PSU configurations, see www.dell.com/poweredgemanuals.
N/A
This PSU provides redundancy to the system. For more
information about the PSU configurations, see
poweredgemanuals.
N/A
Enables you to connect PCI Express expansion cards.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
● If the system stops responding during POST, press and hold
Enables you to connect a display device to the system.
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board
These ports are USB Type A complaint.
This RJ-45 port enables you to remotely access iDRAC. For
more information, see the iDRAC User's Guide at
poweredgemanuals.
The NIC ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with
iDRAC when iDRAC network settings is set to shared mode.
The NIC ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with
iDRAC when iDRAC network settings is set to shared mode.
button is enabled in the iDRAC setup.
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
www.dell.com/
www.dell.com/
Advertisement
Table of Contents
