Installing A Sata Hard Drive And Interposer Card Into A Satau Hard-Drive Carrier - Dell POWEREDGE 1950 Hardware Owner's Manual

Figure 3-20. Installing a SATA Hard Drive Into a SATA Drive Carrier
1
1 screws (4)

Installing a SATA Hard Drive and Interposer Card Into a SATAu Hard-Drive Carrier

NOTE:
When you install a SATA hard drive into a SATAu drive carrier, you must install an interposer card onto
the back of the hard drive. The SATAu drive carrier is labeled "SATAu" and also has marks indicating the SAS and
SATA mounting screws.
1 Insert the SATA hard drive into the SATAu hard-drive carrier with the connector end of the drive at the
rear. See Figure 3-21.
2 Viewing the assembly as shown in Figure 3-21, align the bottom rear screw hole on the hard drive with
the hole labeled "SATAu" on the hard drive carrier.
When aligned correctly, the rear of the interposer will be flush with the rear of the hard-drive carrier.
3 Attach the four screws to secure the hard drive to the hard-drive carrier. See Figure 3-21.
80
Installing System Components
2
2 SATA drive carrier
3
3 SATA hard drive