If A Communication Error Occurs (Ethernet) - Panasonic FP-XH Series User Manual

9.1 What to Do If an Error Occurs
2.
Check if the terminal unit is correctly connected.
Do not designate any unit other than those at both ends of the network as a terminal unit.
3.
Check if the transmission cables are securely connected between the (+) transmission
terminals and between the (-) transmission terminals of each device.
4.
Check if the transmission cables are within the specifications range.
* Use only one type of transmission cable. Do not mix more than one type.

9.1.4 If a communication error occurs (Ethernet)

■
Target
Product No.
AFPX-COM5
■
Situation (when the ERR LED is not lit)
Connections and settings may be incorrect.
■
Solution
1.
Check the setting of the system register.
Check if the settings corresponding to the allocated communication port number are
correct.
2.
Check if the LAN cable is securely connected to each cassette or a PC.
3.
When using a HUB for the connection, check if the power supply of the HUB is on.
4.
Check if the LINK / ACT LED lights up.
When the LED is off, the LAN cable is not connected correctly.
5.
Check the IP address of the control unit and the IP address of the connected device
6.
Check if the transmission format and baud rate for the COM1 port of the Control Unit
matches the configuration setting of the FP-X Communication Cassette (AFPX-COM5).
■
Situation (when the ERR LED is lit)
Connections and settings may be incorrect.
■
Solution
1.
Check the status with the Configurator WD.
1-1
If the "IP duplicate error" is indicated for the status, the IP address may be duplicate
on the network. Specify an IP address that is not duplicate.
9-4
Communication interface
Ethernet x 1 channel
Allocated communication port No.
Control Cassette mounting
unit part 1
COM0 COM1 COM2
●
Cassette mounting
part 2
COM3 COM4
●
WUME-FPXHCOMG-02