Table of Contents
Advertisement
Communication port
Header
Modem connection
Receive buffer starting number in
general-purpose communication
Receive buffer capacity in general-
purpose communication
(Note 1)
It can be set only for general-purpose communication.
(Note 2)
It can be set only for computer link.
(Note 3)
For terminator (end code) judgment time, select 0.01 ms to 100 ms (by 0.01 ms), or transfer time of
approx. 4 characters.
(Note 4)
The setting range of receive buffer starting number in general-purpose communication varies by the
value of system register No. 0.
WUME-FPXHCOMG-02
3.1 Setting of Purpose and Communication Conditions
Setting range
No STX / STX
Invalid / valid
DT0 to DT32764
0 to 2048
(Note 4)
Default
Remarks
No STX
(Note 1)
Invalid
(Note 2)
Depends on port
(Note 1)
No.
(Note 1)
2048
3-3
Advertisement
Table of Contents
