Table of Contents
Advertisement
4.1 To use the ON/OFF button
WARNING:
instructions carefully before you start the
product.
WARNING:
away from the rotating blades. Do not put
your hands or feet near or below the product
when the product is switched on.
WARNING:
when persons, especially children, or
animals are in the work area.
•
Push the ON/OFF button for 3 seconds to switch
on the product. The product is active when the
indicator lamp on the keypad is lit.
•
Push the ON/OFF button for 3 seconds to switch
off the product.
•
The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to switch on the product.
4.1.1 The indicator lamp
The indicator lamps on the keypad shows the operating
mode of the product, refer to
keypad on page 6 .
4.2 To start the product
1.
Push the ON/OFF button for 3 seconds.
2.
Use the keypad to enter the PIN code. Refer to
PIN code on page 22 .
3.
Select the desired operating mode and confirm.
Operating modes on page 23 .
Refer to
1622 - 001 - 03.03.2021
4 Operation
Read the safety
Keep your hands and feet
Do not use the product
LED status indicator on the
Note:
The first weeks after installation the perceived
sound level when cutting the grass may be higher than
expected. When the product has cut the grass for some
time, the perceived sound level is much lower.
4.3 Operating modes
The following operating modes are available:
Main area
•
•
Secondary area
Park
•
Park / Schedule
•
Override schedule
•
•
Spot cutting
4.3.1 Main area
Main area is the standard operating mode where the
product mows and charges automatically.
4.3.1.1 To set the product to operate in Main area
This can be set in the dashboard in the app or with the
keypad on the product:
1.
Push the STOP button.
2.
Push the GO/Schedule button for 1 second.
3.
Push the OK button.
Note:
If there is no set schedule a daily schedule will
be set. The schedule will start at this current time each
day and the product will operate to its maximum cutting
time each day.
4.3.1.2 To set the product to operate in Main area and
make a daily schedule
You can set a schedule that starts at this current time
each day and cuts the maximum cutting time for the
product each day. This can be set in the dashboard in
the app or with the keypad on the product:
1.
Push the STOP button.
2.
Push the GO/Schedule button for 3 seconds.
Operation - 23
Advertisement
Table of Contents
