Table of Contents
Advertisement
2.
Push the ON/OFF button for 3 seconds to switch
off the product.
3.
Make sure that the product is disabled. The
indicator lamp on the ON/OFF button is not lit
when the product is disabled. Refer to
indicator on the keypad on page 6 .
4.
Carry the product by the handle with the blade disc
away from your body.
2.3.4 Maintenance
WARNING:
switched off before maintenance is done.
1622 - 001 - 03.03.2021
LED status
The product must be
The product is disabled when the indicator
lamp on the ON/OFF button is not lit.
WARNING:
the charging station before cleaning or
maintenance of the charging station or the
loop wire.
CAUTION:
Do not use a high-pressure
washer to clean the product. Do not use
solvents for cleaning.
Examine the product weekly and replace damaged or
Maintenance on page 27 .
worn parts. Refer to
2.3.5 In the event of a thunderstorm
To reduce the risk of damage to electrical components
in the product and the charging station, we recommend
that all connections to the charging station are
disconnected (power supply, boundary wire and guide
wire) if there is a risk of a thunderstorm.
1.
Mark the wires to simplify reconnecting. The
charging station's connections are marked R, L
and GUIDE.
2.
Disconnect all connected wires and the power
supply.
3.
Connect all the wires and the power supply if there
is no longer a risk of thunder. It is important that
each wire is connected to the right place.
Use the plug to disconnect
Safety - 11
Advertisement
Table of Contents
