Table of Contents
Advertisement
3.
Push the OK button.
4.3.2 Secondary area
To mow secondary areas the operating mode
Secondary area must be selected. In this mode, the
operator must move the product manually between the
main area and the secondary area. The product mows
until the battery is empty. When the battery is empty, put
the product in the charging station to charge the battery.
When the battery is charged, the product moves out of
the charging station and stops. The product is now
prepared to start operation, but needs confirmation from
the operator first.
Note:
Put the product in the charging station and
change the operating mode to
with the keypad on the product if you want to cut the
main area after the battery is charged.
4.3.2.1 To set the product to operate in Secondary area
This can be set in the dashboard in the app or with the
keypad on the product:
1.
Push the STOP button.
2.
Push the GO button for 3 seconds.
3.
Push the OK button.
4.3.3 Park
Park means that the product returns to
Operating mode
the charging station where it remains until a different
operating mode is selected.
4.3.3.1 To park the product
This can be set in the dashboard in the app or with the
keypad on the product:
24 - Operation
Main area in the app or
1.
Push the STOP button.
2.
Push the Park button for 3 seconds.
3.
Push the OK button.
Note:
To change the operating mode of the product,
push the STOP button and the product will be in idle
mode where you can set an operating mode.
4.3.4 Park / Schedule
Operating mode
Park / Schedule means that the product
goes back to the charging station where it stays until the
next schedule. If the product has operated the maximum
cutting time for the day, it will start to operate again the
next day. Refer to
Make an estimate of the necessary
operating time on page 20 .
4.3.4.1 To park the product and start again with the next
schedule
This can be set in the dashboard in the app or with the
keypad on the product:
1.
Push the STOP button.
2.
Push the Park button for 1 second.
3.
Push the OK button.
Note:
To change the operating mode of the product,
push the STOP button and the product will be in idle
mode where you can set an operating mode.
4.3.5 Override schedule
Override schedule to temporarily override the
Select
schedule settings. You can select to override the
schedule settings for 3 hours. The product can not be
1622 - 001 - 03.03.2021
Advertisement
Table of Contents
