Misfeed In The Mail-Bin Stacker - Sharp MX-M350U Operation Manual

MAIL-BIN STACKER

Misfeed in the mail-bin stacker

If a misfeed has occurred in the mail-bin stacker during printing, remove the misfed paper following the procedure
below.
Open the top cover.
1
Top cover
2 Remove the misfed paper.
If the misfed paper is not found in step 2,
3
open the front cover.
4 Turn the roller rotating knob in the
direction of the arrow to remove the
misfed paper.
5 Open the paper guide.
3-6
Move the tab in the
direction of the arrow as
shown in the illustration
to open the top cover.
Be careful not to tear the
misfed paper during
removal.
After removing the
paper, press down on
the top cover to close it.
Unlatch the paper guide
and open it in the
direction of the arrow.
Remove the misfed paper.
6
7 Close the paper guide.
Close the front cover.
8
Be careful not to tear the
misfed paper during
removal.
Close the paper guide
securely.