Job Build - Sharp MX-M350U Operation Manual

SPECIAL MODES

Job build

Use job build mode when you need to copy more originals than can be placed in the document feeder at once. The
maximum number of originals that can be placed in the document feeder at once is 50 sheets (30 sheets when the
size is B4 or larger; for more information see "Acceptable originals" on page 4-2). This function lets you divide and
scan the originals in sets. This function allows the original pages to be scanned in sets.
[Example] Copying 100 pages of 8-1/2" x 11" originals
Originals
1
100 original pages A:50 sheets
*Divide the originals into sets of 50 pages each.
Scan the originals starting from the first page of set
A. Scan set B next, taking care to keep the correct
page order.
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
1 Touch the [JOB BUILD] key on the special
modes screen.
ES
DUAL
N SHIFT ERASE
JOB TANDE
LET COPY
BUILD COPY
2 Touch the [OK] key on the special modes
screen.
OK
1/3
DUAL PAGE
RASE
COPY
TANDEM
JOB
COPY
BUILD
3 Place the first set of originals in the
document feeder tray. (page 4-3)
5-8
1 51
B:50 sheets
The [JOB BUILD] key
will be highlighted to
COP indicate that the function
is turned on, and the job
build icon ( ) will
appear in the upper left
of the screen.
Return to the main
screen of copy mode.
4 Make sure that the desired paper size is
selected, select the number of copies or
other copy settings, and press the
[START] key.
(set B in the example) and press the [START] key.
Repeat this operation until all sets of originals have
been scanned.
If you wish to adjust the copy settings each time
you place a set of originals, see "Changing the
copy settings for each set of originals" on the next
page.
5 Touch the [READ-END] key.
INTERRUPT
ES
ORIGINAL 8 x11 1 /
2
PLACE NEXT ORIGINAL. PRESS [START].
TO CHANGE COPY SETTINGS,
PRESS [CHANGE].
CHANGE READ-END
4.
11x17
To cancel the job build function, touch the [JOB
BUILD] key on the special modes screen (step 1).
The highlighted display will be canceled.
Scanning of originals will
start. After scanning of
the first set of originals (A
in the example above) is
completed, remove the
scanned originals, place
the next set of originals
C