Sharp MX-M350U Operation Manual page 207

Additional information on using the keys to configure administrator settings
SYSTEM SETTINGS
DEVICE CONTROL
A
ORIGINAL SIZE DETECTOR SETTING
DISABLING OF DUPLEX
B
DISABLING OF STAPLER
A When a key that appears in the form
B When a checkbox ( ) appears in front of a setting, a checkmark (
This indicates that the setting is enabled. If a checkbox with a checkmark (
cleared ( ) and the setting is disabled.
C If the settings continue on the following screen(s), touch the
screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
OK
DISABLING OF DOCUMENT
FEEDER
DISABLING OF LARGE
CAPACITY CASSETTE
DISABLING OF PUNCH
is touched, the setting screen of that key will appear.
XXX
and keys.
USING THE ADMINISTRATOR SETTINGS
These keys and indicator are available
on setting screens that require the entry
of numerical values.
1/2
C
D
) will appear when the checkbox is touched.
) is touched, the checkmark is
and keys to move back and forth through the
(1 999)
20
E
5