Troubleshooting Finisher Problems - Sharp MX-M350U Operation Manual

Hide thumbs Also See for MX-M350U:
Table of Contents

Advertisement

Troubleshooting finisher problems

Check the list below before calling for service.
Problem
Are any finisher covers open?
The finisher does
Message indicating need to remove
not operate.
paper
displayed?
Is a "CHECK THE STAPLER UNIT" or
"CHECK STAPLER POSITION OR
STAPLER JAM" message displayed?
Stapling cannot be
Is
performed.
displayed?
Different size paper included?
Stapled sets are not
stacked correctly or
Paper heavily curled?
some sheets in a set
are not stapled.
Check
from
the
stapler
a
message
"ADD
STAPLES"
Solution or cause
Close all covers.
Open the finisher
as described in
step 4 on page
3-12 and remove
compiler
all paper from the
stapler compiler.
Check the staple unit. (See page 3-11.)
Replace the staple cartridge. (See page 3-10.)
Stapling cannot be performed onto different size
paper.
Paper may be curled heavily depending on the
paper type and quality. Remove paper from the
paper tray or the bypass tray, turn it upside down,
and load it again.
FINISHER
3
3-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents