Energy Saving Features - Sharp MX-M350U Operation Manual

MAIN FEATURES
Hole punching
Copies can be punched to add holes.
Original
* When the saddle stitch finisher and punch
module are installed.
Products that have earned the ENERGY STAR
through superior energy efficiency.
Achieves ENERGY STAR energy savings; product fully qualifies when used with a duplexer.
The Environmental Choice Program guidelines are applied to the products only in Canada. The
products that meet the Environmental Choice Program guidelines carry the logo shown to the left.
The products without the logo may not meet the Environmental Choice Program guidelines.

Energy saving features

This product has the following two power reducing modes to help conserve natural resources and reduce
environmental pollution.
Preheat mode
When the machine remains in the standby state for the amount of time set in the administrator settings, preheat
mode automatically reduces the temperature of the fusing unit to save power while the machine is on standby.
When a fax or print job is received, or keys are pressed on the operation panel, or an original is placed for
a copy, fax, or network scanner job, preheat mode automatically turns off.
Auto power shut-off mode
The auto power shut-off mode is the second level of power reduction. In this mode power is shut off to the
fusing unit and the touch panel. In this state more energy is saved than in the preheat mode but the time to
recover to the ready condition will be longer. The preset time to enter this mode can be set by a administrator
setting.
When this product is used as a printer, and either of the above modes is active, the mode will be deactivated
automatically by an incoming job and the machine will automatically warm up and start to print when it has
reached the ready temperature.
When this product is configured for multi-function operation, and either of the above modes is active, the mode
will be deactivated as above by an incoming print job. Either mode will also be deactivated by operation of
DOCUMENT FILING, IMAGE SEND or COPY mode key.
1-8
See page 3-17
Punch positions
Document filing function
A document image can be stored on the hard disk.
A stored file can easily be called up and printed or
transmitted.
Document
HDD
Image
Save to
machine's
hard disk
* MX-M350N/MX-M450N, or when the document
filing function has been added
are designed to protect the environment
®
See CHAPTER 7
Printed
Transmitted
Call up a
saved file to
reuse