Sharp MX-M350U Operation Manual page 105

Make sure that an appropriate paper size
6
has been selected based on the selected
ratio.
ORIGINAL
AUTO
EXPOSURE
8 x11 1 / 2
AUTO
PAPER SELECT
64%
COPY RATIO
NOTE
If the auto paper select display does not appear, a
tray with the correct size of paper for the selected
ratio will not be automatically selected.
7 Use the numeric keys to set the desired
number of copies.
LOGOUT
cancel an entry if a mistake has been made.
8 Press the [START] key.
original have been scanned. (Step 7 on page 4-12)
To return the ratio to 100%
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 4-16.)
Auto paper select display
Up to 999 can be set.
If you are only making a
single copy, the copy can
be made with the copy
number display showing
"0".
Use the [C] (clear) key to
If you placed the original
on the document glass,
set the output to "Sort",
and pressed the
[START] key, you must
touch the [READ-END]
key after all pages of the
REDUCTION/ENLARGEMENT/ZOOM
4
4-17