Saving Energy And Paper - Sharp MX-C407P User Manual

Maintaining the printer
Shipping the printer
When shipping the printer, use the original packaging or contact the place where you purchased the printer.

Saving energy and paper

Configuring power save mode settings
Sleep mode
1
From the control panel, navigate to:
Settings > Device > Power Management > Timeouts > Sleep Mode
For non‑touch‑screen printer models, press
2
Enter the amount of time that the printer stays idle before it enters Sleep mode.
Hibernate mode
1
From the control panel, navigate to:
Settings > Device > Power Management > Timeouts > Hibernate Timeout
For non‑touch‑screen printer models, press
2
Select the amount of time before the printer enters Hibernate mode.
Notes:
•
Make sure to wake the printer from Hibernate mode before sending a print job.
•
To wake the printer from Hibernate mode, press the power button.
•
The Embedded Web Server is disabled when the printer is in Hibernate mode.
Adjusting the brightness of the display
Note: This setting is available only in some printer models.
1
From the control panel, navigate to:
Settings > Device > Preferences
For non-touch-screen printer models, press
2
In the Screen Brightness menu, adjust the setting.
Conserving supplies
•
Print on both sides of the paper.
Note: Two-sided printing is the default setting in the print driver.
•
Print multiple pages on a single sheet of paper.
to navigate through the settings.
to navigate through the settings.
to navigate through the settings.
101