Epson Powerspan 2 User Manual page 89

Setting a power-on password
To set a power-on password, follow these steps:
1 . S e l e c t S e t I n i t i a l P o w e r - o n P a s s w o r d a t t h e
Password Utility Menu.
2. You see a prompt to enter a password of up to seven
characters. Follow the instructions on the screen to enter
the password twice and return to the Password Utility
Menu.
3. Your power-on password is also now your keyboard
password. If you want to set a different keyboard
password, see "Setting a keyboard password" below.
If you will be using your computer in a network, follow the
steps in the next section to activate a network password.
Activating a network password
To activate a network password, follow these steps:
1. First set a power-on password as described above.
2 . S e l e c t A c t i v a t e / D e a c t i v a t e N e t w o r k P a s s w o r d
from the Password Utility Menu.
3. At the Network Password menu, select Activate
N e t w o r k P a s s w o r d .
4. You see a message confirming the activation. Press
You see the Password Utility Menu.
To deactivate a network password, follow the steps above, but
select Deactivate Network Password instead. If you want
to set a different keyboard password, see the next section.
Using Your Computer
Enter.
4-11