Setting Passwords - Epson Powerspan 2 User Manual

Setting Passwords

There are two ways to set a power-on password:
To set a power-on password in SETUP, follow the instructions
in Chapter 2 for starting and running the program. Select the
Password option on the second page of SETUP options and
follow the instructions on the screen to set a password.
You must run the EISA System Utilities to set a network and
keyboard password, but you can also use it to set a power-on
password.
Follow these steps to set your password (s):
1. To start the EISA Configuration utility, insert the System
Configuration diskette in drive A.
2. Log onto drive A and type
screens to bring up the Main Menu.
3 . S e l e c t A c c e s s S y s t e m U t i l i t i e s .
4. Then select Password Utility. You see the following:
S e t I n i t i a l P o w e r - o n P a s s w o r d
A c t i v a t e / D e a c t i v a t e N e t w o r k P a s s w o r d
S e t K e y b o a r d P a s s w o r d
L o c k K e y b o a r d
R e t u r n t o U t i l i t i e s M e n u
Now follow the steps in the appropriate section(s) below.
4-10 Using your Computer
P a s s w o r d U t i l i t y M e n u
Enter
. Press
SD
at the next two