Epson Powerspan 2 User Manual page 126

4. Hold the card along the top corners and guide it into the
slot, as shown below. (If you are installing a full-length
card, insert the front edge of the card into the
corresponding guide on the right.)
top corners
Once the connectors reach the slot, push the card in firmly
(but carefully) to insert it completely. You should feel the
card fit into place. If it does not go in smoothly, do not force
it; pull it all the way out and try again.
5. Secure the card to the computer with the retaining screw.
If you installed a high-resolution graphics adapter card that
connects to a VGA feature connector, see
Feature Connector" on page 6-10 for further instructions.
Installing and Removing Options
connector
6-9