Epson Powerspan 2 User Manual page 199

5 Volt current
limitation
System current drain
8MB
64MB
CPU cards:
486DX2/66 with
128KB cache
* Each ElSA option slot is rated at 4.5A; however, average current
consumption for all slots used should not exceed 3A per slot. Most EISA
option cardsdraw 2A. If you install a card drawing more than 2A, install it
in a lowernumbered slot (such as 1 or 2) to ensure adequate cooling.
B-6 Specifications
To determine the maximum allowable
amperage of your option cards and other
equipment, use the table below. It lists the
typical system +5 Volt current drain for
your main system board and other
components. Check the 5 Volt amperage
rating of the equipment you install and
make sure the total system amperage does
not exceed 30 Amps.