Epson Powerspan 2 User Manual page 144

9. If you installed a device that uses removable media, such as
a diskette drive, you need to remove the appropriate slot
cover from the computer's front panel. Remove the two
screws that secure the slot cover to the inside of the front
panel, as shown below. Then remove the slot cover and
store it in a safe place.
10. Replace the front panel as described in Chapter 5
Note
Once you have reassembled the computer, you need to run
the SETUP program or the EISA Configuration utility to
configure the system for a diskette drive or other device. For
information, see Chapters 2 and 3.
Installing and Removing Disk Drives 7-7