Models - Graco E-Flo SP EC100CS2 Installation-Parts

Models

Check your pump package's identification (ID) label
located on the side of the electric driver for the 8-digit
part number of your pump package. Use the following
matrix to identify the construction of your pump package
based on the eight digits.
For example: model EC100CS3 is an electric (E)
Check-Mate (C) 100 cc (100) pump with a carbon steel
®
(C) Severe Duty (S) lower, an Advanced Display Mod-
ule (ADM), and 240 VAC power (3).
Pump Style Pump Type
1st Digit 2nd Digit
E Electric Pump C Check-Mate 100 100 cc Check-Mate C Carbon Steel
E Electric Pump D Dura-Flo
NOTE: A single electric pump must include an ADM. Up
to six pumps can be connected in a system and con-
trolled by a single ADM. See Connecting Multiple
Pumps on page 13.
Approvals
3A6586A
Pump Size
3rd, 4th & 5th Digit
200 200 cc Check-Mate S Stainless Steel M MaxLife
250 250 cc Check-Mate
500 200 cc Check-Mate
115 115 cc Dura-Flo
145 145 cc Dura-Flo
180 180 cc Dura-Flo
220 220 cc Dura-Flo
290 290 cc Dura-Flo
430 430 cc Dura-Flo
430 430 cc Dura-Flo
NOTE: Each Check-Mate pump size is available in CS,
CM, SS, and SM pump materials. Dura-Flo pump mate-
rial combinations depend on the pump size. For
Dura-Flow pumps, MaxLife
430 cc stainless steel pump lower. Refer to the matrix
below.
To order replacement parts, see the Parts section start-
ing on page 18.
Pump Material
6th Digit 7th Digit
S Severe Duty
C Carbon Steel S Severe Duty
C Carbon Steel S Severe Duty
S Stainless Steel
S Stainless Steel M MaxLife
Models
®
is only available with the
Interface / Power
8th Digit
1 None 240 VAC
2 ADM 240 VAC
3 None 480 VAC
4 ADM 480 VAC
1 None 240 VAC
2 ADM 240 VAC
3 None 480 VAC
4 ADM 480 VAC
3