Interface Configuration - Planet Networking & Communication GS-5220 Series User Manual

Auto/Specific
Cost
Buttons
Click to add new entry.
Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.4.4.7 Interface Configuration

This is interface configuration parameter table. The screen in
The page includes the following fields:
Object
Interface
Priority
Cost
FastHelloPackets
Hello Interval
summary-LSA(Type-3) and advertised to other areas. Otherwise, the intra area paths from the
address range are not advertised to other areas.
When 'Auto' is selected, the cost value is set to 0 automatically and isn't allowed to be configured.
User specified cost (or metric) for this summary route. It is allowed to be configured only when
'Specific' is selected and the allowed range is 0 to 65535.. The allowed range is 1 to 16777215 and
the default setting is 'auto cost' mode.
Figure 4-4-4-7: Interface Configuration Page Screenshot
Description
Interface identification.
User specified router priority for the interface. The allowed range is 0 to 255 and the default value is
1.
User specified cost for this interface. It's link state metric for the interface. The field is significant only
when 'IsSpecificCost' is TRUE. The allowed range is 1 to 65535 and the default setting is 'auto cost'
mode.
How many Hello packets will be sent per second. The allowed range is 1 to 10 and the default
setting is disabled.
How many Hello packets will be sent per second. The allowed range is 1 to 65535 and the default
value is 10 (seconds).
User's Manual of GS-5220 LCD Series Managed Switch
Figure 4-4-4-7 appears.
256