Table of Contents
Advertisement
• Aging Time
• Traffic Class
• Mode
• Port Security
• Port Discovery
Protocol
4.5.5.5 Voice VLAN OUI Table
Configure VOICE VLAN OUI table on this page. The maximum entry number is 16. Modifying the OUI table will restart auto
detection of OUI process. The Voice VLAN OUI Table screen in
User's Manual of GS-5220 LCD Series Managed Switch
management VID, MVR VID, PVID etc.
The allowed range is 1 to 4095.
Indicates the Voice VLAN secure learning age time. The allowed range is 10 to
10000000 seconds. It used when security mode or auto detect mode is enabled.
In other cases, it will based hardware age time.
The actual age time will be situated in the [age_time; 2 * age_time] interval.
Indicates the Voice VLAN traffic class. All traffic on Voice VLAN will apply this
class.
Indicates the Voice VLAN port mode.
Possible port modes are:
■
Disabled: Disjoin from Voice VLAN.
■
Auto: Enable auto detect mode. It detects whether there is VoIP
phone attached to the specific port and configures the Voice VLAN
members automatically.
■
Forced: Force join to Voice VLAN.
Indicates the Voice VLAN port security mode. When the function is enabled, all
non-telephone MAC address in Voice VLAN will be blocked 10 seconds. Possible
port modes are:
■
Enabled: Enable Voice VLAN security mode operation.
■
Disabled: Disable Voice VLAN security mode operation.
Indicates the Voice VLAN port discovery protocol. It will only work when auto
detect mode is enabled. We should enable LLDP feature before configuring
discovery protocol to "LLDP" or "Both". Changing the discovery protocol to "OUI"
or "LLDP" will restart auto detect process. Possible discovery protocols are:
■
OUI: Detect telephony device by OUI address.
■
LLDP: Detect telephony device by LLDP.
■
Both: Both OUI and LLDP.
Figure 4-5-5-6
287
appears.
Advertisement
Table of Contents
