Table of Contents
Advertisement
Diagnostics Menu
Menu Item
Description
Key On
Indicates whether the ignition key is on or off.
Key Start
Indicates whether the ignition key is in the
Start position or not..
PBrake Latch
Indicates whether the parking-brake latch is
on or off.
EZ Turn
Indicates whether the EZ-Turn circuit is open
or closed.
Traction
Indicates whether the traction lever is on or
off.
Reel Enable
Indicates whether the reel is engaged or not.
Throttle
Indicates the throttle control setting in Volts
(used to calculate the target rpm).
Target rpm
Lists the desired motor rpm as indicated by
the speed control setting.
Motor rpm
Lists the actual motor rpm.
12V Supply
Lists the sensor supply voltage #1 of the
controller.
5V Supply
Lists the sensor supply voltage #2 of the
controller.
CAN Bus
Lists the machine communication bus status.
About Menu
Menu Item
Description
Model
Lists the model number of the machine.
SN
Lists the serial number of the machine.
S/W Rev
Lists the revision number of the machine
software.
Settings Menu
Menu Item
Description
Language
Use this setting to change the language used
on the InfoCenter.
Units
Use this setting to change the units used
by the InfoCenter. The menu choices are
English and Metric.
LCD Backlight
Use this setting to increase or decrease the
brightness of the LCD display.
Use this setting to change the contrast
LCD Contrast
between the dark and light areas of the LCD
display.
Note: If you inadvertently change the language or contrast
to a setting where you can no longer understand or view
the display, contact your Authorized Toro Distributor for
assistance in resetting the display.
28
Advertisement
Table of Contents
