Setting The Machine To Match Turf Conditions - Toro Greensmaster eFlex 1820 Operator's Manual

Setting the Machine to Match Turf Conditions

Use the following table to set the machine to match turf conditions.
Bedbars: Standard and Optional (Flex/eFlex 2100 Mowers)
Part Number Description
106-2468-01 Non-Aggressive
99-3794-03 Aggressive
Bedbars: Standard and Optional (Flex/eFlex 1800 Mowers)
110-2282-01 Non-Aggressive
110-2281-03 Aggressive
Bedknives: Standard and Optional (Flex/eFlex 2100 Mowers)
Part Number Description
115-1880 Microcut-EdgeMax
93-4262 Microcut
108-4303 Extended Microcut
115-1881 Tournament-
EdgeMax
93-4263 Tournament
108-4302 Extended Tournament
93-4264 Low Cut
Bedknives: Standard and Optional (Flex/eFlex 1800 Mowers)
117-1530 Microcut-EdgeMax
98-7261 Microcut
110-2300 Extended Microcut
98-7260 Tournament
117-1532 Tournament-
EdgeMax
110-2301 Low Cut
Aggressiveness
Less
More
Less
More
Height-of-cut Range
1.6 to 3.2 mm (0.062 to 0.125 inches)
1.6 to 3.2 mm (0.062 to 0.125 inches)
1.6 to 3.2 mm (0.062 to 0.125 inches)
3.2 to 6.4 mm (0.125 to 0.25 inches)
3.2 to 6.4 mm (0.125 to 0.25 inches)
3.2 to 6.4 mm (0.125 to 0.25 inches)
6.4 mm (0.25 inches) and up
1.6 to 3.2 mm (0.062 to 0.125 inches)
1.6 to 3.2 mm (0.062 to 0.125 inches)
1.6 to 3.2 mm (0.062 to 0.125 inches)
3.2 to 6.4 mm (0.125 to 0.25 inches)
3.2 to 6.4 mm (0.125 to 0.25 inches)
6.4 mm (0.25 inches) and up
30
Comments
Red, standard
Black
Red
Black, Standard
Comments
Standard
Less aggressive
Less aggressive
Standard
Less aggressive