Pre-Operation Inspection - Shindaiwa DGW500M Owner's And Operator's Manual

Caution: Injury
• Always be sure to use the lifting lug when lifting the equipment, and lift slowly
and directly straight above.
• Wear a helmet, safety shoes, gloves and similar protective gear when performing
lifting work. Do not stand or get under the equipment while it is suspended.
• Securely fix the equipment with rope or similar item so that it cannot move when
transporting by truck or other vehicle.
<Note>
• Tighten a rope from all four-directions to protect against unintended movement
when this equipment intends to transport.
• Handle the equipment with great care when raising, lowering and transporting.
Rough handling of the equipment can result in damage or malfunction.
Roping Lug

7. Pre-Operation Inspection

T
Warning: Injury/Electric Shock
• Do not operate the equipment with any doors or covers open. There is a danger
of hair, body parts and other items being caught up in moving parts such as
cooling fans and belts.
• Always be sure to stop the engine and remove the engine key before performing
any equipment check or maintenance.
Warning: Fire
• Always be sure to wipe up any spilled fuel or oil.
• Absolutely never use the equipment if there is a fuel, oil or cooling water leak,
and be sure to always repair the leak before using.
• Absolutely never inspect or perform maintenance to the equipment near fire or
other open flame.
Caution: Burn
• The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
Tighten a rope from all
four-directions to prevent
the unintended movement.
- 12 -