Using As A Generator; Output Types And Ranges; Usable Device Capacities - Shindaiwa DGW500M Owner's And Operator's Manual

10. Using as a Generator

10-1. Output Types and Ranges

(1) 1-Phase 240V
The equipment includes 1-phase 240V output
terminals.
The maximum output available from the output
terminals is 3.6kVA.
Weld Terminals

10-2. Usable Device Capacities

Usable capacity varies depending on the type and performance of the electrical tool
or household appliance being used.
Device Used
Incandescent bulbs, electrical
heaters and similar devices
Electrical tools (commutator
motor) and similar devices
Mercury lamps (high power factor
types)
Submerged pump, compressor
and similar devices
(Induction motors)
* Commutator motors: Motors with brushes
* Induction motors: Motors without brushes
* Capacity values are displayed under "OUTPUT" for induction motors and under
"POWER CONSUMPTION" for all other devices.
<Note>
• Devices using a motor might require power that is larger than the device rating.
In such cases, consult with the retail outlet where the equipment was purchased.
• Do not start up multiple devices simultaneously if using two or more units of
devices such as submerged pumps. Start each unit separately.
• Do not light up a mercury lamp again immediately after turning it off. Wait for the
lamp to cool down (approximately 15 minutes) after a lamp has been turned off
before turning it on again.
Terminal Cover
AC Output Terminals
Overview of Usable Device Capacities
- 22 -
1-P Breaker
Standard Capacities (Units: kW)
1-Phase 240V
Capacity of Output terminals
3.6
1.8
1.4
1.4