National Instruments PXI Express PXIe-1085 Series User Manual page 53

Waste Electrical and Electronic Equipment (WEEE)
EU Customers
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
.
weee
National Instruments
(RoHS) National Instruments
environment/rohs_china
go to
ni.com/environment/rohs_china
Backplane
Size ................................................................... 3U-sized; one system slot (with three system
Backplane bare-board material ......................... UL 94 V-0 Recognized
Backplane connectors ....................................... Conforms to IEC 917 and IEC 1076-4-101, and
System Synchronization Clocks (PXI_CLK10,
PXIe_CLK100, PXIe_SYNC100)
10 MHz System Reference Clock: PXI_CLK10
Maximum slot-to-slot skew .............................. 1 ns
Accuracy ........................................................... ±25 ppm max. (guaranteed over the operating
Maximum jitter ................................................. 5 ps RMS phase-jitter (10 Hz to 1 MHz range)
Duty-factor........................................................ 45% to 55%
Unloaded signal swing...................................... 3.3 V ±0.3 V
For other specifications refer to the PXI-1 Hardware Specification.
Note
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
At the end of the product life cycle, all products must be sent to
RoHS
(For information about China RoHS compliance,
.)
expansion slots) and 17 peripheral slots.
Compliant with IEEE 1101.10 mechanical
packaging. PXI Express Specification
compliant. Accepts both PXI Express and
CompactPCI (PICMG 2.0 R 3.0) 3U modules.
are UL 94 V-0 rated
temperature range)
NI PXIe-1085 Series User Manual
ni.com/environment/
ni.com/
© National Instruments | A-7