Table of Contents
Advertisement
Optional Equipment
Contact National Instruments to order the following options for the NI PXIe-1085 Series
chassis.
EMC Filler Panels
Optional EMC filler panel kits are available from National Instruments.
Rack Mount Kit
There are two required kits for mounting the NI PXIe-1085 Series chassis into a rack. The first
is a pair of mounting brackets for use on the front of the chassis. The second is a rear rack mount
kit. For more information, refer to Figure A-3,
Slot Blockers
Optional PXI Slot Blocker kits are available from National Instruments for improved thermal
performance when all slots are not used.
Replacement Power Supply
Optional replacement power supply kits are available from National Instruments. You easily can
install replacement power supplies without the use of tools.
Replacement Fan Modules
Optional replacement fan modules are available from National Instruments. You easily can
install fans in seconds without the use of tools and without powering down the system.
NI PXIe-1085 Series Backplane Overview
This section provides an overview of the backplane features for the NI PXIe-1085 Series chassis.
The differences between the NI PXIe-1085 12 GB/s chassis and the
Note
NI PXIe-1085 24 GB/s chassis are noted where applicable.
Interoperability with CompactPCI
The design of the NI PXIe-1085 Series chassis provides you the flexibility to use the following
devices in a single PXI Express chassis:
•
PXI Express compatible products
•
CompactPCI Express compatible 2-Link system controller products
•
CompactPCI Express compatible Type-2 peripheral products
•
PXI peripheral products modified to fit in a hybrid slot
•
Standard CompactPCI peripheral products modified to fit in a hybrid slot
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NI PXIe-1085 Series User Manual
NI Chassis Rack Mount Kit
Components.
© National Instruments | 1-5
Advertisement
Table of Contents
