Table of Contents
Advertisement
Maintenance
This chapter describes basic maintenance procedures you can perform on the NI PXIe-1085
Series chassis.
Disconnect the power cable prior to servicing a NI PXIe-1085 Series
Caution
chassis.
Service Interval
Clean dust from the chassis exterior (and interior) as needed, based on the operating
environment. Periodic cleaning increases reliability.
Preparation
The information in this section is designed for use by qualified service personnel. Read the Read
Me First: Safety and Electromagnetic Compatibility document included with your kit before
attempting any procedures in this chapter.
Many components within the chassis are susceptible to static discharge
Caution
damage. Service the chassis only in a static-free environment. Observe standard
handling precautions for static-sensitive devices while servicing the chassis. Always
wear a grounded wrist strap or equivalent while servicing the chassis.
Cleaning
Cleaning procedures consist of exterior and interior cleaning of the chassis. Refer to your
module user documentation for information on cleaning the individual CompactPCI or
PXI Express modules.
Always disconnect the AC power cable before cleaning or servicing the
Caution
chassis.
Interior Cleaning
Use a dry, low-velocity stream of air to clean the interior of the chassis. Use a soft-bristle brush
for cleaning around components.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
© National Instruments | 3-1
Advertisement
Table of Contents
