Resetting The Television To Its Original State; Deleting Channel History; Timer Settings - Grundig 48 VLE 7461 WL Manual

ConVenIenCe­fUnCTIons
Resetting­the­television­to­its­
original­state
This function enables you to delete the station
lists and all custom settings.
1 From the »About« menu use »
to select the line »Restore Factory Defaults«
and press »oK« to confirm.
– Warning screen will be displayed.
note:
If the loaded applications are also to be de-
7
leted, select the line »Installed applications«
by pressing » « and remove the small tick
Λ
with »oK«.
2 Press »
« (green) to confirm the reset func-

tion.
– I n a short while »Installation Guide« is
displayed.
3 Continue the settings as described in the
chapter on first installation and searching
for channels on page 16.
Deleting­channel­history
This function allows you to delete channel history
stored in the Main menu.
1 From the »About« menu use »
select the line »Delete Channel History« and
press »oK« to confirm.
2 Press » « (green) to confirm the reset func-

tion.
– T he preview images in the main menu are
deleted.
Timer­settings
1 Open menu with »MenU« button.
2 Activate the menu item »Settings« with
3 Select the menu item »Timer Apps« with »
« or » «
V Λ
Parental Guidance
sleep­timer
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
« or » « to
V Λ
1 Select the line »Sleep Timer« with »
2­
3 Press »baCK
on­timer
In the On Timer menu, you can enter a switch-on
time for the television.
The television switches on with the preset vol-
ume and the desired channel after the set time in
stand-by mode has elapsed.
1 Select the line »Auto On« with »
­ - -----------------------------------------------------------
»oK«.
<
or » « and press »oK« to confirm.
– » Timer Applications« menu is displayed.
Timer Applications
Sleep Timer
Auto On
Auto Off
Advanced
note:
Additional operations are explained in the
7
following sections.
» «.
Λ
Select the switch-off time with »
note:
To switch off the function, use »
7
set the switch-off time to »Off«.
« to go back one menu
<
level or press »eXIT« to end the setting.
and press »oK« to confirm.
Network Configuration
Off
Change Area Back Exit
« or
V
< >
« or » «.
< >
« or » « to
« or »
V Λ
enGlIsH
>
«
«
69­