Table of Contents
Advertisement
Disassembly
Removing the System Memory (RAM)
Figure 8
RAM Module
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
Removal
DDRIII (DDR3L) Up to 1600 MHz. The main memory can be expanded up to 16GB. The SO-DIMM modules supported
are 1024MB and 2048MB DDRIII Modules. The total memory size is automatically detected by the POST routine once
a. Remove the screws
you turn on your computer.
from the component
bay cover.
Memory Upgrade Process
b. Remove the compo-
nent bay cover. The
1. Turn off the computer, turn it over, and remove the battery
RAM modules will be
2. Remove screws
visible at point
4
on
3. Carefully remove the bay cover
the mainboard.
4. The RAM modules will be visible at point
a.
Contact Warning
Be careful not to touch
the metal pins on the
module's
connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.
3. Component Bay Cov-
er
• 2 Screws
2 - 12 Removing the System Memory (RAM)
-
from the component bay cover
1
2
.
3
on the mainboard
4
b.
2
1
(page 2 -
5).
(Figure
8a).
)
(Figure 8b
.
4
3
Advertisement
Table of Contents
