Table of Contents
Advertisement
Disassembly
4. Remove the component bay cover
Figure 4
5. Lift the HDD sponge up at point
HDD Assembly
lift the hard disk assembly
Removal (cont'd.)
6. Remove the screws
7. Reverse the process to install a new hard disk (do not forget to replace the screws and bay cover).
c. Remove the bay cover.
d. Lift the sponge and slide
the HDD assembly in the
c.
direction of the arrow to
lift the HDD assembly
out.
e. Remove the screws and
adhesive cover.
New HDD's are blank. Before you
begin make sure:
You have backed up any data you
want to keep from your old HDD.
You have all the CD-ROMs and
FDDs required to install your oper-
ating system and programs.
3. Component Bay Cov-
If you have access to the internet,
er
download the latest application and
6. HDD Assembly
hardware driver updates for the op-
9. Adhesive Cover
erating system you plan to install.
10. HDD
Copy these to a removable medi-
um.
• 2 Screws
2 - 8 Removing the Hard Disk Drive
(Figure 4c
6
3
and grip the tab to slide the hard disk assembly in the direction of arrow
4
out
(Figure 4d
6
6
-
and the adhesive cover
7
8
HDD System Warning
e.
).
).
from the hard disk
9
10
d.
4
3
8
9
10
7
to
5
)
(Figure 4e
.
5
6
Advertisement
Table of Contents
