Removing The Hard Disk Drive - Clevo W655SJ Service Manual

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
or 7mm (h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as
outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and remove the battery
2. Locate the component bay cover and remove screws
3. Slide the component bay cover
a.
2
(page 2 - 5).
- (Figure 3a
1 2
until the cover and case indicators
3
b.
1
)
.
are aligned (Figure 3b).
4
4
4
3
Removing the Hard Disk Drive 2 - 7
Disassembly
Figure 3
HDD Assembly
Removal
a. Remove the screws.
b. Remove the component
bay cover.

3. Component Bay
Cover
• 2 Screws