Table of Contents
Advertisement
Disassembly
Removing the System Memory (RAM)
Figure 6
RAM-1 Module
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
Removal
DDR3L up to 1600 MHz. The main memory can be expanded up to 16GB. The total memory size is automatically de-
tected by the POST routine once you turn on your computer.
a. The RAM modules will
be visible at point
1
.
Memory-1 Upgrade Process
b. Remove the screws
1. Turn off the computer, turn it over, remove the keyboard
and lift the shielding
2. The RAM modules will be visible at point
plate out.
3. Remove screws
a.
Contact Warning
Be careful not to touch
the metal pins on the
module's
connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.
6. RAM Shielding Plate
• 4 Screws
2 - 10 Removing the System Memory (RAM)
after removing the shielding plate
1
-
and lift the shielding plate
2
5
b.
1
(page 2 -
5).
(Figure 6a
off the computer
(Figure 6b
)
.
6
2
3
6
)
.
5
4
Advertisement
Table of Contents
