is an Advanced Technology Attachment device.
ata
▪
is the system booting device..
bootmedia
▪
is a Converged Network Adapter not connected to a network or storage device.
cna
▪
is motherboard environments.
env
▪
is the Flash Cache adapter, also known as the Performance Acceleration Module
fcache
▪
2.
is a Fibre Channel-Arbitrated Loop device not connected to a storage device or
fcal
▪
Fibre Channel network.
is the Fiber Channel Virtual Interface not connected to a Fibre Channel network.
fcvi
▪
interconnect
▪
is system memory.
mem
▪
is a Network Interface Card not connected to a network.
nic
▪
is nonvolatile RAM.
nvram
▪
is a hybrid of NVRAM and system memory.
nvmem
▪
is a Serial Attached SCSI device not connected to a disk shelf.
sas
▪
serviceproc
▪
is an ATA, FC-AL, or SAS interface that has an attached disk shelf.
storage
▪
is a TCP Offload Engine, a type of NIC.
toe
▪
specifies that all the motherboard devices are to be tested.
mb
◦
specifies that a device in a specific slot number is to be tested.
slot slotnum
◦
specifies a given device class and type.
-name device
◦
4. View the status of the test by entering the following command:
Your storage system provides the following output while the tests are still running:
There are still test(s) being processed.
After all the tests are complete, the following response appears by default:
*> <SLDIAG:_ALL_TESTS_COMPLETED>
5. Verify that no hardware problems resulted from the addition or replacement of hardware
components on your storage system by entering the following command:
status [-dev devtype|mb|slotslotnum] [-name device] -long -state failed
The following example pulls up the full status of failures resulting from testing a newly installed
FC-AL adapter:
or
is the high-availability interface.
nvram-ib
is the Service Processor.
sldiag device status
sldiag device
115