Upgrading and migrating
16
Check the gap between the printer and the finisher.
If the gap is uneven, then do either of the following:
a
To fix the gap at the top, rotate the side wheels of the finisher clockwise.
b
To fix the gap at the bottom, rotate the side wheels of the finisher counterclockwise.
17
Connect the power cords to the finisher and the printer, and then connect them to a properly grounded
electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power
strips, multioutlet extenders, or UPS devices. The power capacity of these types of accessories can
be easily overloaded by a laser printer and may result in a risk of fire, property damage, or poor
printer performance.
18
Turn on the printer.
If necessary, manually add the finisher in the print driver to make it available for print jobs.
CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area
during print jobs that use the stapler in the multiposition staple, hole punch finisher.
Software
Supported operating systems
Using the software CD, you can install the printer software on the following operating systems:
•
Windows 10
•
Windows 8.1
•
Windows Server 2012 R2
274