Linking Trays; Installing The Printer Software; Updating Firmware; Installing And Updating Software, Drivers, And Firmware - Sharp MX-B427W User Manual

Set up, install, and configure
4
Adjust the guide to match the size of the paper that you are loading.
5
From the control panel, set the paper size and paper type to match the paper loaded.

Linking trays

1
From the home screen, touch Settings > Paper > Tray Configuration > select a paper source.
2
Set the same paper size and paper type for the trays that you are linking.
3
From the home screen, touch Settings > Device > Maintenance > Config Menu > Tray Configuration >
Tray Linking.
4
Touch Automatic.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
Installing and updating software, drivers, and firmware

Installing the printer software

1
Obtain a copy of the software installer package.
•
From our website.
•
From the place where you purchased the printer.
2
Run the installer, and then follow the instructions.
3
For Macintosh users, add the printer.
Note: For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to
print on an AirPrint-certified printer.
Updating firmware
Some applications require a minimum device firmware level to operate correctly.
30