Sharp MX-C557F User Manual page 70

Understanding the printer menus
Menu item
Screen Brightness
20–100% (100*)
Flash Drive Access
Enabled*
Disabled
Allow Background Removal
Off
On*
Allow Custom Job scans
Off
On*
One Page Flatbed Scanning
Off*
On
Output Lighting
Off*
On
Audio Feedback
Button Feedback (On*)
Volume (5*)
Screen Timeout
5–300 seconds (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Eco-Mode
Menu item
Print
Sides (1‑Sided*)
Pages per Side (Off*)
Toner Darkness (4*)
Color Saver (Off*)
Copy
Sides (1 sided to 1 sided*)
Pages per Side (Off*)
Darkness (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Adjust the brightness of the display.
Enable access to the flash drive.
Specify whether background removal is allowed.
Specify whether the Custom Job Scanning setting appears for
copy, scan, and fax.
Note: This menu item appears only when a hard disk is
installed.
Set the printer to scan any type of job involving the scanner
glass as a single page.
Note: The printer returns to the home screen after
performing a single flatbed scan instead of displaying
prompts.
Enable the integrated output light or indicator light of an
optional output bin.
•
Enable audio feedback for button presses, panel
interactions, paper loaded prompts, and error notifications.
•
Adjust the feedback volume.
Set the idle time before the display shows the home screen or
before the printer logs out a user account automatically.
Description
Configure the print settings of the printer.
Configure the copy settings of the printer.
70