Sharp MX-C557F User Manual page 109

Understanding the printer menus
Menu item
Auto Color Detect
Color Sensitivity (5*)
Area Sensitivity (5*)
FTP Bit Depth (1 bit*)
JPEG Quality
Best for content*
5–95
Contrast
Best for content*
0
1
2
3
4
5
Background Removal
Background Detection (Content‑based*)
Level (0*)
Mirror Image
Off*
On
Negative Image
Off*
On
Shadow Detail
‑4 to 4 (0*)
Scan Edge to Edge
Off*
On
Sharpness
1–5 (3*)
Temperature
‑4 to 4 (0*)
Blank Pages
Blank Page Removal (Remove*)
Blank Page Sensitivity (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the auto color detection setting.
Set the JPEG quality of the scanned image.
Specify the contrast for the scanned image.
Remove the background color or image noise from the original
document.
Notes:
•
Content-based removes the background color from the original
document .
•
Fixed removes image noise from a photo.
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the shadow detail in the scanned image.
Allow edge‑to‑edge scanning of the original document.
Adjust the sharpness in the scanned image.
Generate a bluer or redder output of the original document.
Set the sensitivity of scans in relation to blank pages in the original
document.
109