Table of Contents
Advertisement
12. OPTIONS AND AUXILIARY EQUIPMENT
12. OPTIONS AND AUXILIARY EQUIPMENT
WARNING
CAUTION
12.1 Options
12.1.1 Regenerative options
CAUTION
(1) Combination and regenerative power
The power values in the table are resistor-generated powers and not rated powers.
Servo amplifier
Built-in regenerative
resistor
MR-J2S-10B(1)
MR-J2S-20B(1)
MR-J2S-40B(1)
MR-J2S-60B
MR-J2S-70B
MR-J2S-100B
MR-J2S-200B
MR-J2S-350B
MR-J2S-500B
MR-J2S-700B
Note. Always install a cooling fan.
Servo amplifier
External regenerative resistor
MR-J2S-11KB
MR-J2S-15KB
MR-J2S-22KB
Note. Values in parentheses assume the installation of a cooling fan.
Before connecting any option or peripheral equipment, turn off the power and wait
for 15 minutes or more until the charge lamp turns off. Then, confirm that the
voltage between P and N is safe with a voltage tester and others. Otherwise, an
electric shock may occur. In addition, always confirm from the front of the servo
amplifier whether the charge lamp is off or not.
Use the specified auxiliary equipment and options. Unspecified ones may lead to a
fault or fire.
The specified combinations of regenerative options and servo amplifiers may only
be used. Otherwise, a fire may occur.
MR-RB032
[40 ]
30
10
30
10
30
10
30
20
30
20
30
100
100
130
170
(Accessory)
500 (800)
850 (1300)
850 (1300)
Regenerative power[W]
MR-RB12
MR-RB32
MR-RB30
[40 ]
[40 ]
100
100
100
100
300
100
300
(Note) Regenerative power[W]
MR-RB65
[8 ]
500 (800)
12 - 1
(Note)
MR-RB31
MR-RB50
[13 ]
[6.7 ]
[13 ]
300
500
300
500
300
500
MR-RB66
[5 ]
850 (1300)
(Note)
MR-RB51
[6.7 ]
300
500
MR-RB67
[4 ]
850 (1300)
Advertisement
Table of Contents
