View Or Change The Router Lan Port Aggregation Mode - NETGEAR MR90 User Manual

e. In the LAN Port Aggregation section, select an LAN port aggregation mode (by
default, LAN port aggregation is disabled):
• Enable (LACP-IEEE 802.3ad). After you connect the Ethernet cables (see the
following step), the router communicates with the LAN device that is connected
to the LAN Aggregation ports on your router, and checks to see if LAN port
aggregation is supported on the LAN device. If LAN port aggregation is
supported, the router automatically trunks the LAN Aggregation ports. If
not,the LAN Aggregation ports work as independent LAN ports. We
recommend that you select this mode unless your LAN device can support a
static LAG only.
• Enable static LAG. If your device supports a static LAG only, select this mode.
Otherwise, we recommend that you to select the Enable (LACP-IEEE 802.3ad)
radio button instead.
f. Click the Apply button.
Your settings are saved.
3. Connect your LAN device to the LAN Aggregation ports on the router.

View or change the router LAN port aggregation mode

To view or change your router's LAN port aggregation mode:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Ethernet Settings
The Ethernet Port Advanced Settings page displays.
In the LAN Port Aggregation section, the LAN Port Aggregation Status field shows
whether port aggregation is active:
• Inactive. No link aggregation LAN device is connected to the LAN Aggregation
ports on your router.
Manage Network Settings
Nighthawk Tri-band Mesh WiFi 6E
99 User Manual